flotation zinc cationic

Selective flotation of Iranian angooran oxidised zinc ore using cationic, anionic and mixed collectors. S. H. Hosseini. Chemistry, Materials Science. ... In this study, the flotation of oxidized zinc ore from Angooran ore in the presence of cationic collector such as dodecylamine (DDA), anionic collectors such as oleic acid ...

After lead flotation at optimum pH 8, the flotation of zinc at a different pH (5–11.5), with two collector types, was performed to study the recovery and grade of zinc in the zinc concentrate.

Flotation is widely used to concentrate low-grade zinc ores (using anionic, cationic, or mixture of anionic/cationic routes). The choice of route depends on the main zinc-bearing mineral in the deposit and its associated gangue mineral.

The direct flotation of zinc oxide ore using anionic collectors or mixed anionic/cationic collectors shows poor separation between zinc oxide minerals (such as smithsonite) and other carbonate minerals (such as calcite). Therefore, the development of a new or effective collector for the flotation of smithsonite from calcite is needed.

Anionic, cationic and cationic/anionic flotation is widely used in the concentration process for low-grade oxidized zinc ores. In the cationic flotation route, sodium silicate is used as a ...

The most common flotation collectors used commercially for the treatment of zinc oxide minerals are cationic collectors and sulfhydryl collectors, such as amine and xanthate . As is well known, slime causes significant negative effects on the flotation with amine, and xanthate exhibited a relatively poor collecting capacity for the zinc oxide ...

Flotation of smithsonite coming from a cerussite flotation circuit was investigated using Armac C and Armac T as cationic collectors and their mixtures with potassium amyl xanthate (KAX) as...

The flotation tests performed indicated that zinc sulfides produced could be separated from the treated slag. The zinc grade increased from 13.63 to 32.76% and a total zinc recovery of 88.17% was ...

Anionic, cationic and cationic/anionic flotation is widely used in the concentration process for low-grade oxidized zinc ores. In the cationic flotation route, sodium silicate is used as a ...

At present, the most common flotation technique commercially used for the treatment of zinc oxide ores is sulfidized with Na 2 S followed by treatment with a conventional cationic collector, an ...

Flotation of zinc oxide ore using cationic and cationic-anionic mixed collectors 155 Conclusion From two amine collectors used in this study, Armac T acts a little more selectively than Armac C and results in smithsonite concentrate with higher Zn grade while Ar- mac C is effective in enhancing the recovery of Zn. The KAX–Armac C mixed collec ...

Anionic, cationic and cationic/anionic flotation is widely used in the concentration process for low-grade oxidized zinc ores. In the cationic flotation route, sodium silicate is used as a ...

The most common flotation technique used commercially for the treatment of zinc oxide minerals is sulfidization with Na2S, followed by treatment with conventional cationic …

The result of two-stage cleaner flotation showed that zinc grade could be increased up to 16.2% with zinc recovery of 61.39%. A representative sample of zinc …

The mixed cationic and anionic collectors were found to be as effective as the HF reagent system in obtaining high grade feldspar concentrates. Iron-bearing raw marine sand consisting of quartz (88%) and feldspar (10%) was treated by Mathieu and Sirois (1984) using the same combination of anionic-cationic promotors.

DOI: 10.1016/J.MINENG.2011.05.018 Corpus ID: 97801174; Influence of important factors on flotation of zinc oxide mineral using cationic, anionic and mixed (cationic/anionic) collectors

The result of two-stage cleaner flotation showed that zinc grade could be increased up to 16.2% with zinc recovery of 61.39%. ... Mehdilo, A., Irannajad, M., and Zarei, H., Flotation of zinc oxide ore using cationic and cationic-anionic mixed collectors, Physicochem. Problems Miner. Process., 2013, vol. 49.

Flotation is the process of separation of beneficial minerals from a mixture by creating froth on which minerals separate out. This is a method of mineral processing in which different minerals are separated selectively. The ores containing multiple metals, such as lead, copper and zinc, can be selectively extracted by using froth floatation.

The result of two-stage cleaner flotation showed that zinc grade could be increased up to 16.2% with zinc recovery of 61.39%. A representative sample of zinc oxide from Dashteh Sefid mine was obtained and then mineral characterization studies were done. The results of mineralogical analysis showed that the main zinc-bearing minerals …

Flotation is the most widely used method of enriching zinc oxide minerals for mineral processing. Chelating reagents have received extensive attention for the …

The most common flotation technique used commercially for the treatment of zinc oxide minerals is sulfidization with Na 2 S, followed by treatment with conventional cationic collectors, namely ...

The usual way for separating iron minerals from copper and zinc sulphide minerals is magnetic separation, and flotation is the most common method of enriching the copper and zinc [11][12][13][14 ...

Corpus ID: 97801174. Influence of important factors on flotation of zinc oxide mineral using cationic, anionic and mixed (cationic/anionic) collectors. M. Ejtemaei, M. …

The results of oleic acid flotation showed that the grade and recovery of zinc were Cationic collector relatively low in comparison with the sulphidization-cationic flotation method. Despite using sodium sil- Flotation Mixed collectors icate and SH as depressants in oleic acid flotation, flotation was not selective.

Flotation Behavior of Oxide Zinc Ore from Angooran Deposit, Iran in the Presence of Cationic/Anionic and Mixed (Cationic/Anionic) Collectors S. Hamid Hosseini and Eric Forssberg

Abstract The surface interaction and adsorption of the components in a mixture of surfactants are of considerable interest for both practical and theoretical reasons. The flotation behaviour of smithsonite in the presence of sodium sulphide (Na2S) and a mixture of potassium amyl xanthate (KAX) and dodecylamine (DDA) and its adsorption on …

The choice of route depends on the main zinc-bearing mineral in the deposit and its associated gangue mineral. Cationic flotation at pH 11 using a soluble sulphide and amine as a collector is the ...

The most common flotation technique used commercially for the treatment of zinc oxide minerals is sulphidization with Na 2 S, followed by treatment with …

The effect of ethylenediamine on flotation efficiency was conducted; the results showed that without addition of ethylenediamine, the recovery of smithsonite was only 32.85% when the usage of dodecylamine-hydrochloride as collector was 5 × 10 −4 mol/L. The optimum dosage of ethylenediamine was 6 × 10 −3 mol/L and flotation …

method for the recovery of oxidized lead and zinc minerals from ores at present is flota-tion (Onal G. et al., 2005). The flotation of oxidized lead and zinc minerals, particularly zinc minerals, is much more difficult than the flotation of corresponding sulfide miner-als. Hexyl and amyl xanthates are capable of collecting smithsonite.

1.. IntroductionThe flotation of oxidized lead and zinc minerals, particularly zinc minerals, is much more difficult than the flotation of corresponding sulphide minerals (Rey, 1953).Hexyl and amyl xanthates are capable of collecting smithsonite; however, the process is not selective enough in practice (Gaudin, 1957).The amount of sulphidizing …

Flotation of zinc oxide ore using cationic and cationic-anionic mixed collectors 147 Materials and Methods Materials A representative sample containing 21.7% Zn was taken from tailing of the cerrusite flotation circuit. The chemical composition of the ore sample and pure smithsonite determined by XRF is presented in Table 1.

The result of two-stage cleaner flotation showed that zinc grade could be increased up to 16.2% with zinc recovery of 61.39%. No full-text available. To read the …

DOI: 10.1016/J.MINENG.2012.05.013 Corpus ID: 96680817; Flotation of zinc oxide ores by cationic and mixed collectors @article{Mehdilo2012FlotationOZ, title={Flotation of zinc oxide ores by cationic and mixed collectors}, author={Akbar Mehdilo and Hossein Zarei and Mehdi Irannajad and H. Arjmandfar}, journal={Minerals Engineering}, year={2012}, …

At present, the most common flotation technique commercially used for the treatment of zinc oxide ores is sulfidized with Na 2 S followed by treatment with a conventional cationic collector, an ...

Flotation Behavior of Oxide Zinc Ore from Angooran Deposit, Iran in the Presence of Cationic/Anionic and Mixed (Cationic/Anionic) Collectors S. Hamid Hosseini and Eric Forssberg

@article{Wang2021ActivationMO, title={Activation mechanisms of quartz flotation with calcium ions and cationic/anionic mixed collectors under alkalescent conditions}, author={Li Wang and Guodong Wang and Peng Ge and Wei Sun and Honghu Tang and Wenjihao Hu}, journal={Colloids and Surfaces A: Physicochemical and …

Cationic collector is usually used for flotation of quartz and silicate minerals, and also used for flotation of the zinc oxide in smithsonite and the potassium chloride in sylvite or carnallite. According to the hydrocarbyl connected with the nitrogen atoms in amine, such collectors can be classified into aliphatic amine, aromatic amine, …